Flood Detector    Back    Home    Contact APS DETECTS AND WARNS OF SUMP PUMP FAILURES Features:

	Constructed of heavy duty, non-corroding PVC throughout.
	Stainless steel mounting hardware.
	Provides extra reliability by utilizing an INDEPENDENT flotation-type activator.
	Sealed reed-type switch and permanent ceramic magnet provide exceptionally high isolation and protection to alarm panel even in the event of sump pump insulation breakdown.
	Adapts easily to central station monitoring.
	Will operate even if unit is totally submerged.
	Vitually foolproof!  Superior to solid state electode type detectors!

Specifications:

	Switch is U.L. listed glass, hermetically sealed, form C reed type which is activated by a permanent ceramic magnet.  Switch rated at .3 amps at 38 VDC
	Insulation resistance is greater than 10 megohms at S.T.P. and 25% R.H.
	No exposed metal parts to react with water or household environment.
	The 1 3/8" wide PVC universal clamp will fit 1" to 3" diameter return pipes as standard.
	A flat clamp as per your specifications can also be provided. (optional)
	Float material is expanded P./S. Foam to be used for non-solvent liquids provoded as standard
	On request we can retrofit the foam material to be impervious to solvent liquids.
	Dimensions:  Weight, 8 oz.  Height, 12"  Maximum detect level  1"
	Normally open and normally closed C contacts provided as standard.

Installation:
Operation of the Model JR2 FLOOD WATCH is primarily dependantupon installation at the appropriate location on the sump pump discharge pipe.

	Mount FLOOD WATCH so that its float is situated just above the point where water level should activate the sump pump.
	Attach the Model JR2 FLOOD WATCH to the discharge pipe using the enclosed clamp and fasteners.
	Connect FLOOD WATCH wires to the protective circuit as follows:

	GREEN WIRE  -  Normally closed
	WHITE WIRE  -   Common
	RED WIRE   -    Normally open

Alarm Parts and Supply Co., Inc. 800-635-8987   716-681-4277   FAX:  716-681-5305